emtrion logo

Lothron Multimedia Base Board

Click to enlarge


DIMM-Base Lothron is a baseboard (carrier board) for our processor modules in DIMM format. It's a Multi media Base board for DIMM modules with WIFI socket, CAN and connector for 2 camera interfaces.

Features DownloadsDeveloper KitsAccessories

Technical Features

Analog Audio via 3,5 mm Audio Jack1 x
Camera (generic) via Pin Header2 x
Composite Video Input via Cinch3 x
Composite Video Output via Cinch1 x
DVI-I Interface (generated from RGB) via DVI-I Connector1 x
LCD Interface (generic) via DF13 Connector1 x
LVDS Interface (generic) via LVDS Connector1 x
SPDIF (digital audio) via Pin Header1 x
100Base-TX Ethernet via RJ45 Jack1 x
Analog input via Pin Header1 x
CAN (LVTTL) via Pin Header2 x
CPU-Bus interface via Pin Header1 x
GPIO (from SODIMM) via Pin Header10 x
I²C via Pin Header1 x
SATA via SATA Connector1 x
SD Interface via SD socket1 x
SD Interface via microSD socket1 x
SPI via Pin Header1 x
UART (LVTTL) via Pin Header3 x
UART (RS232) via DSub-92 x
USB Device via USB-B Connector1 x
USB Host via USB-A Connector 3 x
microUSB to UART converter1 x
3D-Accelerometer (I²C)1 x
Backlight (5V) via Pin Header1 x
Keypad via Pin Header1 x
Power over Ethernet PoE, IEEE 802.31 x
Spread Spectrum Oscillator1 x
Special Functions
Power Supply: 5V or PoE
Reference designs available

Operating Temperature
0°C to 70°C

Mechanical Dimensions
166mm x 140mm x 43mm (WxDxH)

If you need not listed features please contact emtrion!

More information regarding this product are available in our SupportNet.